Table of Contents
Advertisement
26. Press PresInd until the required presentation indicator setting is
shown:
yes
no
27. Press Exit.
Use SPM?
Yes
No
Note that this menu appears only when SwType is set to DMS or
Auto.
28. Press Yes if your ISDN line supports SPM (available on DMS
switches only).
If you press No you need to enter feature key and DN assignments
manually using the instructions provided in Using the Keys Menu
on page 29.
29. The configuration of MainROM using the Install Menu is now
complete. Press more... and then Exit to exit MainROM
configuration. The set takes a few minutes to initialize. Press any DN
key to speed up the process. After a few moments, the set returns to
an idle state, as shown in the following example:
Inspect
Forward
The installation of voice and data features is now complete. If you
need to install downloading parameters, follow instructions in chapter
4, BootROM configuration.
ID Pres softkey is available.
ID Pres softkey is not available.
1 JAN 00:00
Auto#
Setup
M5317TX and CustomNet Installation Guide
MainROM configuration
25
Advertisement
Table of Contents
