Northern Telecom M5317TX Installation Manual page 41

If you are defining a DN key, use the EditDN key to enter or change
4.
the DN.
If the type is FA, CAP, or LOC, press Feature until the display
shows the feature code you want to assign to the key (see below):
Features available for FA keys
AFC Additional Functional Call
AUD Automatic Dial
AUL Automatic line
CAR Call Request
CFV Call Forward Validation
CFX* Call Forward
CPK* Call Park
CPU* Call Pick-up
EBO* Executive Busy Override
FCC* Flexible Call Conference
FCD* Flexible Call Drop
FCT* Flexible Call Transfer
* Features are supported by softkeys (keys 13-64).
Features available for CAP keys
CCH Call Appearance
ICM Intercom
CAP key features can only be assigned to keys 1-11.
Features available for LOC keys
Local features are listed in the M5317TX voice
user guide
Press Save.
5.
6. Repeat steps 1-5 for each feature and DN you need to assign to a key.
When you have finished assigning all the required functions to keys,
press Exit.
MainROM configuration
GEN Generic feature
LNR Last Number Redial
LPA Loudspeaker Paging
MSB* Make Set Busy
MWT Message Waiting
PRL* Privacy Release
PRV* Privacy
RAG* Ring Again
SPL Speed Call long
SPS Speed Call short
SPU Speed Call User
GIC Group Intercom
M5317TX and CustomNet Installation Guide
31