Prepare The M5317Tx - Northern Telecom M5317TX Installation Manual

16 Preparing to install the M5317TX

Prepare the M5317TX

8.
9.
10. Connect the other end of the handset cord to the jack on the
11. Connect one end of the RJ45 line cord to the connector on the base
12. Turn the set right-side up and place it in the final workstation
M5317TX and CustomNet Installation Guide
Turn the set upside-down on a flat, static-free surface.
Connect one end of the handset cord to the handset connector on
the base of the set. Route the cord through the channel and past the
restraining tabs.
handset.
of the set. Route the cord through the channel and past the
restraining tabs.
position.