Northern Telecom M5317TX Installation Manual page 45

10. Enter the DN of the server for telephone-initiated downloading (see
chapter 6).
If you are not configuring the set for server-initiated downloading,
leave ServrOut blank.
11. Press OK.
12. Press more....
See Guide
SPID TEI
13. Press SPID.
Select SPID to update
Phone
14. Press Phone.
Phone SPID:
<--
Note that if a SPID has already been defined, it is shown on the first
line of the display. If you want to retain the SPID displayed, go to
step 16.
15. Enter the Phone SPID. Use the Clear and <-- softkeys to edit your
input, if necessary.
ETSI
Leave Phone SPID blank for ETSI signalling.
16. Press OK.
BootROM configuration
Test Exit
Clear
M5317TX and CustomNet Installation Guide
35
more...
Exit
OK