Selecting The Ring Tone And Cadence; Selecting The Display Language - Northern Telecom M5317TX Installation Manual

Selecting the ring tone and cadence

When connected to a DMS or Meridian 1 switch, you can select the ringer
pitch (High or Low) and cycle speed (Slow or Fast). You can also adjust
the ring cadence (Ring1 for North America, Ring2 for Australia).
Selecting the ring tone
1. Press Setup.
2. Press Ringing. You hear the current ring tone and cadence. If you do
not see Ringing on the display, press more... until it appears.
3. Press each of the softkeys to listen to the ring tones.
4. When you have selected the tone you prefer, press more...
5. Press OK.
Selecting the ring cadence
1. Press Setup.
2. Press Ringing. You hear the current ring tone and cadence. If you do
not see Ringing on the display, press more... until it appears.
3. Press Ring1 for North American installations.
Press Ring2 for Australian installations.

Selecting the display language

1. Press Setup.
Select update item
Lang
If Lang is not shown, press more... until it is displayed.
2. Press Lang. The following is shown on your display.
English
3. Press the softkey for the desired display language.
4. Press Exit.
Data Clock
Francais Espanol
M5317TX and CustomNet Installation Guide
Customizing the M5317TX
Volume more
43