Invoking Spm From A Working Set - Northern Telecom M5317TX Installation Manual

32 MainROM configuration

Invoking SPM from a working set

If you need to quickly re-configure the set with new or changed features,
you can invoke SPM (when available) by using the Setup Menu, as
described below:
While the set is operating normally (in MainROM), press Setup. in
1.
the idle screen display.
Press the digits fi⁄ ⁄‡ to activate the special setup menus.
2.
Press more... until SPM appears.
3.
Press SPM. After a few moments a message is displayed which
4,
indicates SPM has been completed.
Press EXIT. Your set is now updated with new feature and DN key
5.
assignments
M5317TX and CustomNet Installation Guide