Table of Contents
Advertisement
20
MainROM configuration
Entering BootROM/MainROM configuration
There are two methods of selecting the ROM to configure:
Method 1
1.
Unplug the line cord (RJ-45 connector) from the jack underneath the
set and wait ten seconds.
2.
Re-insert the line cord back into the jack.
Within four seconds of reconnecting the line cord, press ˙ and ®
3.
simultaneously until BootROM/MainROM appears on the display.
Select ROM to execute
BootROM MainROM
You can now press either BootROM or MainROM, depending upon
which ROM you want to configure.
Method 2
While the set is operating normally (in MainROM), press Setup in
1.
the idle screen display.
Press the digits fi⁄ ⁄‡ to activate the special setup menus.
2.
Press more... until BootROM appears.
3.
Press BootROM. After a few seconds the display is blanked.
4,
Press ˙ and ® simultaneously until BootROM/MainROM appears on
5.
the display.
Select ROM to execute
BootROM MainROM
You can now press either BootROM or MainROM, depending upon
which ROM you want to configure.
M5317TX and CustomNet Installation Guide
Advertisement
Table of Contents
