Labelling The M5317Tx; Selecting The Customer Documentation - Northern Telecom M5317TX Installation Manual

44 Customizing the M5317TX

Labelling the M5317TX

1. Remove the Key designation labels sheet from the Literature kit.
2. Print the directory number on one of the Telephone number cards.
3. Remove the handset from the telephone.
4. Insert the Telephone number card into the slot in the handset cradle.
5. Remove the plastic lens from the keycap package.
6. Snap the plastic lens into place, covering the Telephone number card.
7. Replace the handset.
8. Detach any key labels that are required from the key labels sheet.
9. If you cannot locate a specific key label, write the name on a blank key
label and detach it from the sheet.
10. Fold the key labels and insert one inside each plastic key cover.
11. Snap each key cover onto the appropriate telephone key.

Selecting the customer documentation

1. Remove the remaining information from the Literature kit.
2. Give the customer a data communications guide and a voice features
user guide. (In North America, use the table below to choose the
appropriate voice features user guide.)
3. Discard the Installer Card. (In North America, also discard the other two
voice features user guides.)
M5317TX and CustomNet Installation Guide
Signalling Type
Functional signalling DMS
Functional signalling AT&T
Meridian 1
Meridian Feature Transparency
User Guide
NI-1 voice guide
AT&T voice guide
M1 voice guide
MFT voice guide