Huawei F01T100 Quick Installation Manual page 45

13 Installing Batteries
Put the battery into the battery compartment.
12 Ah battery
Connect the cables of the four batteries in series, and connect the cables to the battery port of the AC main
equipment or the BATT+ and BATT-wiring terminals of the power supply.
Cable connection when a cabinet is configured with a 12 AH battery:
When the AC main equipment is configured:
+
+
+ +
Black cable
BAT+
BAT-
Battery ports on the AC main equipment
For cabinets configured with 20 AH and 40 AH batteries, the cable connections are the same. The following
uses the 20 AH battery configuration as an example:
When the AC main equipment is configured:
+ - + - + -
Black cable
BAT+
Battery ports on the AC main equipment
After confirming that the cable connections are correct, switch on the battery circuit breaker of the AC main
equipment or the BATT circuit breaker of the ETP4860 power system.
20 Ah battery
Battery compartment
Blue cable
Battery switch
+ -
Blue cable
Battery switch
BAT-
Battery compartment
When the DC main equipment is configured:
+
+
Black cable
BAT+
BAT-
Battery ports on the power system
When the DC main equipment is configured:
+ - + - + -
Black cable
BAT+
Battery ports on the power system
42
40 Ah battery
Battery
compartment
+
+
Blue cable
+ -
Blue cable
BAT-