Table of Contents
Advertisement
9 Installing the cabinet on a Concrete Pedestal
9.2 Fastening the Cabinet
Hold the drill firmly and keep the drill bit vertical to the concrete pedestal. Ensure that the drill does not shake
when you are drilling holes, as this may result in uneven holes.
Drill holes and install four M12 × 60 expansion bolts
Unit: mm
90°
52 ~ 60
Use the steel cable to carry the cabinet
onto the concrete pedestal.
Bearing capacity
of the steel cable
> 468 kg
Expansion bolt
16
Flat washer
Guide through
≤90°
Spring washer
Expansion tube
Expansion nut
When the cabinet with the battery compartment
Step 1: Open and fasten the door.
Support lever
The installation holes
19
Support lever
Step 2: Insert the
expansion bolts into all
installation holes to fasten
the cabinet.
M12 × 60
expansion
bolt
Advertisement
Table of Contents
