Appendix A Preprocessing The External Subscriber Cables - Huawei F01T100 Quick Installation Manual

Appendix A: Preprocessing the External
Subscriber Cables
After the external cables enter the cabinet, ensure that the stripped cables are winded with the adhesive
tape to protect the filling materials inside cables against overflow.
After the external cables are stripped, ensure that the filling materials of all wires of all the scripted
cables must be clean. No residues are allowed.
• It is recommended that you use the detergent specified by the cable manufacturer to clean
filling materials. Do not use gasoline or unidentified detergent.
• It is recommended that you use the absorbent cotton or soft paper of good oil absorption to
clean the cable.
• Ensure that every cable pairs are separately cleaned. Do not clean only the external-layer
cable from multi-layer cables.
During cable construction, do not apply filling materials inside cables to the terminal block support
or the other places of the cabinet.
Before installing the terminal block onto the support, clean the terminal block and
support.
The filling material of the external cable in each area is different. Do not use the external cable
that contains chemicals (such as toluene and organic acid) corrosive to PC material to connect
the MDF terminal block.
Adhesive tape
60