Table of Contents
Advertisement
14 Installing Li-ion Batteries
14.4 Connecting Li-ion Battery Cables (Configured with a 40 Ah
Battery Compartment)
When installing the lithium batteries, strictly follow the operation instructions. Metal installation tools (such as
•
wrench) must be wrapped with insulation tape. Any short circuit may cause serious consequences for both
the personnel and equipment.
Before routing lithium battery power cables, ensure that the battery switch is OFF.
•
Ensure that the connection and polarity between the lithium batteries and the power system are correct.
•
Use a cable cutter to cut the cable ties and remove the PE bag.
Remove the heat shrink tubes of the Li-ion battery power cables using a knife.
48
Advertisement
Table of Contents
