Before Getting Started; Parts Included - Humanscale efloat go Assembly Instructions Manual

Before Getting Started

• If using a power drill, use a low torque setting.
• Do assemble product on a protective surface.
• 2 or more people may be required to maneuver the table.
• After assembly, the table will need to have an initial set up/reset performed before table can be
used.
Tools Required
①
Philips Head Screw Driver

Parts Included

①
(2) Legs
④
(10) Adhesive Pads
⑦
Power Supply
⑩
Humanscale Worksurface
(CONFIGURATION SPECIFIC, PACKAGED SEPARATELY)
4
②
Power Drill with Philips Driver bit
②
(2) Brackets
⑤
Hand Switch
⑧
Connecting Cable
⑪
4mm Allen Key
③
Measuring Tape
③
(2) Feet
⑥
Control Box
⑨
(10) Cable Ties