Before Getting Started; Tools Required; Parts Included - Humanscale efloat GO 2.0 Manual

Before Getting Started

If using a power drill, use a low torque setting.
• Do assemble product on a protective surface.
• Two or more people may be required to maneuver the table.
• After assembly, the table will need to have an initial set up/reset performed before table can be
used.

Tools Required

1
Philips Head Screw Driver

Parts Included

1
(2) Lifting Column
5
Note: Each shipment contains (1) set of
T-legs or (1) set of C-legs, not both
or
(2) Feet T-Leg
9
(1) Adapter Arm
4
2
Power Drill with Philips Driver bit
2
(2) Left Beam
(2) Feet C-Leg
10
(1) Power Cord
3
(2) Right Beam
6
(2) Connecting Rod
11
(1) Adapter Cable
3
Measuring Tape
Note: Each shipment contains (1) set of
4
Wing Brackets for T-Leg or (1) set of Wing
Brackets for C-Leg, not both
or
(2) Wing Bracket
T-Leg
7
(1) Handset
12
Humanscale Worksurface
(1) Extension Cord
(2) Wing Bracket
C-Leg
8
(1) Power Adapter
13
(CONFIGURATION SPECIFIC,
PACKAGED SEPARATELY)