Humanscale efloat go Assembly Instructions Manual page 13

To Set the LOWER-Limit Position:
1. Use the UP /DOWN buttons to move the base to the desired minimum-height position.
2. Press the "M" button.
3. Press the DOWN button and release. The LED display will flash "S -" .
4. Hold the "M" button (about 2 seconds) until the LED display changes to "000" . The display will
automatically return to the selected height. The new lower limit is now set.
To Remove the Upper/Lower Limit Positions:
1. Press the "M" button. The LED display will flash "S -" .
2. Press the "M" button again and hold for 2 seconds. The LED display will change to "555" and
then automatically return to the height display. The upper and lower limits are now removed.
Handset Lock
To lock the handset:
Press and hold the "M" button (about 8 seconds) until the LED display switches to "S -" and then to
"LOC. " Release the button.
To unlock the handset:
Press and hold the "M" button (about 8 seconds) until the LED switches from "LOC" to the height
display. Release the button.
13