Humanscale efloat go Assembly Instructions Manual page 3

• The 24" feet should be used for worksurfaces 23"-24" deep and the 30" feet should be used
for the worksurfaces 30" deep and less.
• For loading, always put heavier items in the center and distribute the load.
• Do not sit or stand on table.
USE CARE WHEN OPERATING DESK:
• Before using the table check for any visible signs of damage. Do not use a damaged product.
• Make sure no obstacles are in the desk's path and that the desk is not touching walls or
neighboring objects.
• Items taller than 20" in height should not be placed or stored under the desk.
• Keep Table Frame dry. Keep all electrical components away from water and high
not spray cleaning solutions directly onto table frame.
• Working Temperature for table is 5 - 40
• Make sure all the cords are the appropriate length to accommodate the change in height.
• Although this product comes with anti-collision function, in order to avoid any pinching, please
ensure that hands or other body parts are in a safe position during the operation.
• Unplug power cord during a thunderstorm or if you do not intend to use the desk for a long
time.
• Never use the table if it has a damaged cords or plugs.
• Keep cords away from heated surfaces.
• Over time grease might start to accumulate on the inner columns of the table legs, if this occurs
wipe columns with a soft cloth.
DO NOT OPEN ELECTRICAL COMPONENTS: Do not attempt to service the table's components.
There are no user-serviceable components within the motor control box, hand switch, or table legs. If
your table needs service or you are having issues with your table, please contact customer service.
GROUNDING INSTRUCTIONS: This product is for use on a nominal 120-volt circuit and has a
grounding plug that looks like the plug illustrated below. Make sure that the product is connected to an
outlet having the same configuration as the plug. No adapter should be used with this product.
GROUNDED
OUTLET
GROUNDED
PIN
Do not modify the plug provided with the product - it will not fit the outlets, have a proper outlet
installed by a qualified electrician.
C
O
humidity. Do
3