ENGLISH
Before installing the appliance ensure that the mains voltage and power correspond to the
data given in the specifications table. Take the appliance out of the packaging and put it in
its final place of installation ensuring that it is stable and safe and that there is the necessary
space for using it.
Place the machine in a way that the distance between the grid and the floor is not less than
150cm.
4.1 ELECTRICAL CONNECTION
Before connecting the power cable, follow the instructions below to install a safety switch and
of the proper capacity:
Install ground cable, then phase cables. Uninstall phase cables first and then ground if
needed. Make sure the ground connection complies with existing standards and regulations.
To connect directly to the mains electricity supply, include a device to disconnect the appliance
from the mains, with a contacts opening distance which allows complete disconnection in
conditions of category III over tension, in compliance with the installation rules.
N.B. CHECK THAT THE DATA ON THE RATING PLATE CORRESPOND TO
YOUR MAINS ELECTRICITY SUPPLY.
4.2 INSTALLING THE POWER SUPPLY CABLE
L1 N
208 - 220V 60Hz
4. INSTALLATION
L1
L1
L1
230 VOLT
TWO PHASE
18
ZOE COMPETITION
L2
PHASE (L1)
BLACK
PHASE (L2)
WHITE
GROUND(
)