Operating System Installation - VersaLogic EBX-22 Reference Manual

Table of Contents

Advertisement

POST
SIO
+--------------------------------------------------------+---------------------+
|
| CPU Real-Time Statistics
| -------------------------------------------------------|
| Thermal Diode Reading, Current *C:
|
|
+--------------------------------------------------------+---------------------+

Operating System Installation

The standard PC architecture used on the EBX-22 makes the installation and use of most of the
standard x86 processor-based operating systems very simple. The operating systems listed on the
VersaLogic OS Compatibility Chart
maker of the OS. Special optimized hardware drivers for a particular operating system, or a link
to the drivers, are available at the EBX-22 Product Support web page at
http://www.versalogic.com/private/Sidewindersupport.asp.
Note
An operating system installed on a different type of computer is not guaranteed to
work on the EBX-22. This is referred to as a "foreign" installation. A hard disk that
was used to boot a different computer cannot necessarily be moved to the EBX-22
and expected to boot. Even when porting an OS image from one revision of the
EBX-22 to another, performance might fail or be impaired. For the best results,
perform a fresh installation of the OS on each system. This restriction does not
apply if you are producing multiple identical systems.
EBX-22 Reference Manual
Status Tab
Features
Firmbase
Misc
50
use the standard installation procedures provided by the
Configuration and Setup
Board
Chipset
Status
|
|
|
|
|
|
|
|
|
|
|
16

Advertisement

Table of Contents
loading

Table of Contents