Table of Contents
Advertisement
OS Installation
CD-ROM
USB Keyboard
and Mouse
1. Install Memory
Insert the DDR2 DRAM module into the SODIMM socket J2 and latch it into place.
2. Attach Cables and Peripherals
Plug the video adapter cable CBR-1201 into socket J7. Attach the video monitor interface
cable to the video adapter.
Plug the USB CD-ROM drive, keyboard, and mouse into on-board USB sockets (J3, J4,
J9, or J11).
Plug the SATA data cable CBR-0701 into socket J8 or J10, and attach the SATA hard
drive to the cable.
EBX-22 Reference Manual
ATX
Power
Supply
CBR– 2022
J6
CD-ROM
Drive
USB
J4 J11
J3 J9
USB
J7
Figure 3. Typical Start-up Configuration
Configuration and Setup
CBR– 0401
EBX-22
SATA
"Sidewinder"
Hard Drive
J10
J8
CBR– 0701
CBR– 1201
Analog SVGA
9
Advertisement
Table of Contents
