Technical Specifications - VersaLogic EBX-22 Reference Manual

Technical Specifications

Specifications are typical at 25°C with 5.0V supply unless otherwise noted.
Board Size:
5.75" x 8.00" x 1.75"; EBX compliant
Storage Temperature:
Free Air Operating Temperature:
0° C to +60° C EBX-22g
Power Requirements:
SODIMM, keyboard and mouse, Windows XP)
EBX-22g – +5.0V ± 5% @ 2.2.0A (11W) typ.
EBX-22h – TBD
+3.3V or ±12V may be required by some
expansion modules
System Reset:
V sensing, resets below 3.3V, 2.5V, or if
cc
Vcore power are not within +/- 10% of
optimal values
DRAM Interface:
One 240-pin SODIMM socket
Up to 1 GB 533 MHz, PC2-4200 compatible,
DDR2 RAM
Video Interface:
Analog outputs for VGA or YPbPr
Digital output, HDMI connector (DVI video
only)
LVDS output for TFT FPDs
Up to 1280 x 1024 (24 bits)
2D/3D MPEG-2/4 graphics
IDE Interface:
One channel, 44-pin keyed 2mm header.
Supports up to UDMA/33.
Supports up to two IDE devices (hard drives,
CD-ROM, CompactFlash, etc.)
SATA Interface:
T
wo SATA I headers
Ethernet Interface:
T
wo Intel 82551ER based fast Ethernet
10BaseT/100BaseTX controllers
Audio Interface:
HD audio codec, one Line Out and one Line
In support
COM1–2 Interface:
RS-232, 16C550 compatible, 115k baud
max.
Specifications are subject to change without notice.
EBX-22 Reference Manual
-40° C to 85° C
(with 256 MB DDR2
COM3–4 Interface:
RS-232 4-wire, RS-422, RS-485, 16C550
compatible, 460k baud max.
LPT Interface:
Bi-directional/EPP/ECP/floppy mode
compatible
Analog Input:
8-channel, 12-bit, single-ended, 500 kSPS,
channel independent input range: 0 to
+4.095V
Digital Interface:
32-channel, ±24 mA source and sink, 3.3V
signaling
SPX Interface:
Supports 4 external SPI chips either of user
design or any of the SPX™ series of
expansion boards
Counter/timers:
Three PWM outputs, three TACH inputs
which can be used as general purpose
counter/timers
BIOS:
General Software Embedded BIOS© with
OEM enhancements
Field-upgradeable with Flash BIOS Upgrade
Utility
Bus Speed:
CPU Bus: 400 MHz
PC/104-Plus (PCI): 33 MHz
PC/104 (ISA): 8 MHz
Compatibility:
EBX – full compliance
PC/104 (ISA) – limited compliance via PCI to
ISA bridge in PLD
PC/104-Plus) (PCI) – full compliance, 3.3V
signaling, PCI 2.2 compatible
SPX™ – full compliance
Weight:
EBX-22g – 0.606 lbs (0.275 kg)
EBX-22h – TBD
Introduction
3