Maintenance Work; Lubricate - SCHUNK TANDEM KSP3 Assembly And Operating Manual

7.4 Maintenance work

7.4.1 Lubricate

Size
64
100
140
160
250
CAUTION
Allergic reactions or irritation due to skin or eye contact with
lubricants on the product.
• In case of foreseeable contact with lubricants on the product
(e.g. when lubricating or cleaning), wear protective equipment
(protective gloves, protective goggles)
To maintain reliable function and high quality of the product, it has
to be regularly lubricated. This can be done with a hand lever press
for greases or by means of central lubrication.
Manual lubrication
• Press grease either into the grease nipples at
• Only lubricate in the open position.
• After greasing, run through the complete
• Grease to be used and lubrication
02.00 | KSP3, KSP3-LH, KSP3-F | Assembly and Operating Manual | en |
1463318
the side or front of the respective supply line
(6/7).
stroke several times.
intervals. } 7.3 [/ 29]
Grease quantity (strokes per grease nipple)
Maintenance and care
1
2
2
2
3
29