Appendix On Declaration Of Incorporation, As Per 2006/42/Ec, Annex Ii, No. 1 B - SCHUNK TANDEM KSP3 Assembly And Operating Manual

Appendix on Declaration of Incorporation, as per 2006/42/EC,
annex II, No. 1 B
11 Appendix on Declaration of Incorporation, as per
1. Description of the basic safety and health protection requirements, as per 2006/42/EC,
annex I, that apply to and are fulfilled for the scope of the incomplete machine:
Product designation TANDEM clamping force block, pneumatic
Type designation
ID number
1.1 Essential Requirements
1.1.1 Definitions
1.1.2 Principles of safety integration
1.1.3 Materials and products
1.1.4 Lighting
1.1.5 Design of machinery to facilitate its handling
1.1.6 Ergonomics
1.1.7 Operating positions
1.1.8 Seating
1.2 Control Systems
1.2.1 Safety and reliability of control systems
1.2.2 Control devices
1.2.3 Starting
1.2.4 Stopping
1.2.4.1 Normal stop
1.2.4.2 Operational stop
1.2.4.3 Emergency stop
1.2.4.4 Assembly of machinery
1.2.5 Selection of control or operating modes
1.2.6 Failure of the power supply
46 02.00 | KSP3, KSP3-LH, KSP3-F | Assembly and Operating Manual | en |
1463318
2006/42/EC, annex II, No. 1 B
KSP3, KSP3-LH, KSP3-F
1382588, 1409254-1409257, 1409263-1409265, 1409267-1409274,
1409281-1409284, 1409295-1409298, 1409300-1409303,
1409307-1409314, 1409321-1409324, 1409334-1409337,
1409342-1409353, 1409358-1409361, 1433619-1433622,
1433636-1433639, 1433654-1433657, 1433664-1433667,
1433671-1433674, 1433682-1433685, 1433689-1433692,
1433695-1433698, 1433701-1433704, 1433718-1433721,
1433724-1433727, 1433756-1433759, 1433812-1433815, 1433818-
To be provided by the System Integrator for the overall machine ⇓
1433825
Fulfilled for the scope of the partly completed machine ⇓
Not relevant ⇓
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X