Environmental And Operating Conditions; Personnel Qualification - SCHUNK TANDEM KSP3 Assembly And Operating Manual

Basic safety notes

2.6 Environmental and operating conditions

2.7 Personnel qualification

Trained electrician
8 02.00 | KSP3, KSP3-LH, KSP3-F | Assembly and Operating Manual | en |
1463318
When using special chuck jaws, please observe the following rules:
• The chuck jaws should be designed to be as low as possible. The
clamping point must be as close as possible to the housing.
(clamping points at a greater distance cause higher surface
pressures in the jaw guidance and can significantly reduce the
clamping force.)
• Do not use welded jaws.
• Reduce operating pressure for higher clamping points.
Required ambient conditions and operating conditions
Incorrect ambient and operating conditions can make the product
unsafe, leading to the risk of serious injuries, considerable material
damage and/or a significant reduction to the product's life span.
• Make sure that the product is used only in the context of its
defined application parameters,
• Make sure that the product is a sufficient size for the
application.
• Ensure that maintenance and lubrication intervals are
observed, } 7 [/ 28].
• Ensure that the environment is free from ferromagnetic
particles or chips.
Inadequate qualifications of the personnel
If the personnel working with the product is not sufficiently
qualified, the result may be serious injuries and significant
property damage.
• All work may only be performed by qualified personnel.
• Before working with the product, the personnel must have read
and understood the complete assembly and operating manual.
• Observe the national safety regulations and rules and general
safety instructions.
The following personal qualifications are necessary for the various
activities related to the product:
Due to their technical training, knowledge and experience, trained
electricians are able to work on electrical systems, recognize and
avoid possible dangers and know the relevant standards and
regulations.
} 3 [/ 14].