Connecting The Clamping Force Block - SCHUNK TANDEM KSP3 Assembly And Operating Manual

5.3 Connecting the clamping force block

I OPEN (front)
II CLOSED (front)
III OPEN (bottom)
IV CLOSED (bottom)
V Coolant drainage / connection for air purge (front)
1 Dynamic pressure monitoring for jaw end position "open"
2 Air coupling in top jaw 1
3 Air coupling in top jaw 2
4 Dynamic pressure monitoring for jaw end position "closed"
5 Bottom connection for coolant drain or use for air purge
6 Bottom connection for lubrication (one-sided supply, left)
7 Bottom connection for lubrication (one-sided supply, right)
8 No use
The clamping force block has two more base connections (6/7) for
direct lubrication through the machine table. These connections
come sealed on delivery with set-screws (item 62).
02.00 | KSP3, KSP3-LH, KSP3-F | Assembly and Operating Manual | en |
1463318
Assembly and connection
Hose-free
direct connection
Clamping
system
Adapter
O-ring
21