Sealing Kits, Accessory Kits And Parts Lists; Sealing Kit Lists; Piston Chamber Sealing Kit; Monitoring Sealing Kit / Connection - SCHUNK TANDEM KSP3 Assembly And Operating Manual

8 Sealing kits, accessory kits and parts lists

When ordering spare parts, the type
, size and, if possible, the serial number of the
clamping block must always be stated to avoid delivery mistakes.
Seals, sealing elements, screw connections, springs, bearings,
screws, wiper bars and parts that come into contact with the
workpiece are not covered by the warranty.

8.1 Sealing kit lists

There are two sealing kits. One for the piston chamber (piston
chamber sealing kit) and one for the pneumatic monitoring
(monitoring sealing kit). The sealing elements for the bottom
connections are included in both sealing kits.

8.1.1 Piston chamber sealing kit

The sealing kit for the piston chamber contains all seals for the
parts installed inside (e.g. cylinder pistons), as well as the O-rings
of the bottom connections.
Sealing kit *
Size 64
Size 100
Size 140
Size 160
Size 250
* For included items, see column > y < in the Parts List chapter
below.
Wearing parts - replacement when maintenance is performed is
recommended
The sealing kit can only be ordered as a compete kit.

8.1.2 Monitoring sealing kit / connection

The sealing kit for monitoring includes all seals and wear parts for
the pneumatic monitoring of the PM variants, as well as the O-
rings of the bottom connections.
Sealing kit *
Size 64
Size 100
Size 100-LH
Size 140
Size 160
Size 250
02.00 | KSP3, KSP3-LH, KSP3-F | Assembly and Operating Manual | en |
1463318
Sealing kits, accessory kits and parts lists
ID number
1463219
1470645
1470642
1470647
1470648
ID number
1470480
1470390
1470468
1470482
1470397
1470398
37