Connecting The Clamping Force Block - SCHUNK KSP3 Assembly And Operating Manual

Assembly and connection

4.4 Connecting the clamping force block

I OPEN (front)
II CLOSED (front)
III OPEN (bottom)
IV CLOSED (bottom)
V Coolant drainage / connection for air purge (front)
1 Dynamic pressure monitoring for jaw end position "open"
2 Air coupling in top jaw 1
3 Air coupling in top jaw 2
4 Dynamic pressure monitoring for jaw end position "closed"
5 Bottom connection for coolant drain or use for air purge
6 Bottom connection for lubrication (one-sided supply, left)
7 Bottom connection for lubrication (one-sided supply, right)
8 No use
Tab.: Hose-free direct connection
Clamping system
①
Adapter
②
Sealing element
③
20 05.00 | KSP3, KSP3-LH, KSP3-F | TANDEM Clamping Block | en | 1463318