User Interface/5100P Application Software
The AMETEK 5100P TDLAS Analyzer is equipped with an easy-to-navigate, local
User Interface, which allows you to perform basic functions such as for setting
Concentration Alarm high and low setpoints, choosing Units of measure-
ment, and configuring various system parameters. The 5100P Application
Software offers expanded capability and functionality. Information for both
communication options is described in this chapter.
PN 9000-246-VE, Rev D
Before working from the User Interface or 5100P Application Software,
read the entire section titled "Introduction to the User Interface" to learn
how to navigate through the screens to work on the analyzer.
User Interface/5100P Application Software
|
3-1