Fuses - Hyundai KONA 2021 Owner's Manual

Maintenance

FUSES

  Blade type Blade type
 
A A
  Cartridge type Cartridge type
 
A A
  Multi fuse Multi fuse
 
A A
A A
[A] : Normal, [B] : Blown
A vehicle's electrical system is protected
from electrical overload damage by
fuses.
This vehicle has 2 (or 3) fuse panels, one
located in the driver's side panel bolster,
the other in the engine compartment.
If any of your vehicle's lights,
accessories, or controls do not work,
check the appropriate circuit fuse. If a
fuse has blown, the element inside the
fuse will be melted or broken.
9-54
If the electrical system does not work,
first check the driver's side fuse panel.
Before replacing a blown fuse, turn the
engine and all switches off, and then
disconnect the negative battery cable.
Always replace a blown fuse with one of
the same rating.
B B
If the replacement fuse blows, this
indicates an electrical problem.
Avoid using the system involved. We
recommend that you immediately
consult an authorized HYUNDAI dealer.
B B
Three kinds of fuses are used: blade type
for lower amperage rating, cartridge
type, and multi fuse for higher amperage
ratings.
B B
NEVER replace a fuse with anything but
another fuse of the same rating.
• A higher capacity fuse could cause
• Do not install a wire or aluminum
B B
NOTICE
OLF074075 OLF074075
Do not use a screwdriver or any other
metal object to remove fuses because
it may cause a short circuit and damage
the system.
Information
WARNING
damage and possibly cause a fire.
foil instead of the proper fuse -
even as a temporary repair. It may
cause extensive wiring damage and
possibly a fire.