Hyundai KONA 2021 Owner's Manual page 418

• If the rear corner radars have been
replaced or repaired, we recommend
that the vehicle be inspected by an
authorized HYUNDAI dealer.
• Use only genuine parts to repair the
rear bumper where the rear corner
radar is located.
• Do not apply license plate frame or
objects, such as a bumper sticker,
film or a bumper guard near the rear
corner radar.
• The function may not work properly
if the bumper has been replaced, or
the surroundings of the rear corner
radar has been damaged or paint has
been applied.
• If a trailer, carrier, etc. is installed,
it may adversely affect the
performance of the rear corner radar
or the function may not operate.
For more details on the precautions
of the front view camera, refer to
"Forward Collision-Avoidance Assist
(FCA)" section in chapter 7.
Function settings
Setting
Blind-Spot Safety
With the engine on, select or deselect
'Driver Assistance → Blind-Spot Safety'
from the Settings menu to set whether or
not to use each function.
- If 'Active Assist' is selected, the
function will warn the driver with a
warning message, an audible warning
and braking assist will be applied
depending on the collision risk levels.
- If 'Warning Only' is selected, the
function will warn the driver with
a warning message and an audible
warning depending on the collision
risk levels. Braking will not be assisted.
- If 'Off' is selected, the function will
turn off.
07
OTM070096N OTM070096N
7-45