Hyundai KONA 2021 Owner's Manual page 647

Hide thumbs Also See for KONA 2021:

Table of Contents

Stop/Tail lamp

1. Turn off the engine.

2. Open the tailgate.

3. Loosen the lamp assembly retaining

screws with a cross-tip screwdriver.

4. Remove the rear combination lamp

assembly from the body of the

5. Remove the socket from the

assembly by turning the socket

counterclockwise until the tabs on

the socket align with the slots on the

6. Remove the bulb from the socket

by pressing it in and rotating it

counterclockwise until the tabs on the

bulb align with the slots in the socket.

Pull the bulb out of the socket.

7. Insert a new bulb by inserting it into

the socket and rotating it until it locks

8. Install the socket into the assembly by

aligning the tabs on the socket with

the slots in the assembly. Push the

socket into the assembly and turn the

socket clockwise.

9. 9. Reinstall the lamp assembly to the

body of the vehicle.

Chapters

Table of Contents