Driver assistance system
Function settings
Setting
To turn on the function
• Press the Driving Assist button to turn
on the system. The speed will be set
to the current speed on the cluster.
•
If there is no vehicle in front of you,
the set speed will be maintained, but
if there is a vehicle in front of you,
the speed may decrease to maintain
the distance to the vehicle ahead. If
the vehicle ahead accelerates, your
vehicle will travel at a steady cruising
speed after accelerating to the set
speed.
Information
• If your vehicle speed is between 0~
30 km/h (0~ 20 mph) when you press
the Driving Assist button, the Smart
Cruise Control speed will be set to
30 km/h (20 mph).
• The Driving Assist button symbol may
vary depending on your vehicle option.
7-80
Type A
Type A
Type B
Type B
OOS070008E
OOS070008E
To set vehicle distance
Each time the button is pressed, the
vehicle distance changes as follows:
Distance 4
Distance 3
Distance 1
Information
• If you drive at 90 km/h (56 mph), the
distance is maintained as follows:
Distance 4 -
approximately 53 m (172 ft.)
Distance 3 -
approximately 40 m (130 ft.)
Distance 2 -
approximately 30 m (106 ft.)
Distance 1 -
approximately 25 m (82 ft.)
• The distance is set to the last set
distance when the engine is restarted,
or when the system was temporarily
canceled.
OOS070013K
OOS070013K
Distance 2