Fuses - Hyundai IONIQ 5 Owner's Manual

Hide thumbs Also See for IONIQ 5:
Table of Contents

Advertisement

Maintenance

FUSES

■ Blade type
Normal
■ Cartridge type
Normal
■ Multi type
Normal
9-30
A vehicle's electrical system is protected
from electrical overload damage by
fuses.
This vehicle has 5 fuse panels, one
located in the driver's side panel bolster,
the other in the vehicle compartment.
Blown
If any of your vehicle's lights,
accessories, or controls do not work,
check the appropriate circuit fuse. If a
fuse has blown, the element inside the
fuse will be melted or broken.
If the electrical system does not work,
first check the driver's side fuse panel.
Before replacing a blown fuse, turn the
vehicle and all switches off, and then
disconnect the negative battery cable.
Always replace a blown fuse with one of
Blown
the same rating.
If the replacement fuse blows, this
indicates an electrical problem.
Avoid using the system involved. We
recommend that you immediately
consult an authorized HYUNDAI dealer.
NEVER replace a fuse with anything but
another fuse of the same rating.
• A higher capacity fuse could cause
Blown
damage and possibly cause a fire.
OTM078035
OTM078035
• Do not install a wire or aluminum
foil instead of the proper fuse -
even as a temporary repair. It may
cause extensive wiring damage and
possibly a fire.
NOTICE
Do not use a screwdriver or any other
metal object to remove fuses because
it may cause a short circuit and damage
the system.
WARNING

Advertisement

Table of Contents
loading

Table of Contents