Hyundai KONA 2021 Owner's Manual page 431

Driver assistance system
Warning Volume
With the engine on, select 'Driver
Assistance → Warning Volume' from the
Settings menu to change the Warning
Volume 'High', 'Medium' and 'Low' for
Blind-Spot Safety system.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
CAUTION
• The setting of the Warning Timing
and Warning Volume applies to all
functions of the Safe Exit Warning.
• Even though 'Normal' is selected
for Warning Timing, if the vehicles
approaches at high speed from the
rear, the initial warning activation
time may seem late.
• Select 'Late' for Warning Timing
when traffic is light.
7-58
Function operation
Function warning
OTM070141N OTM070141N
Collision warning when exiting vehicle
• When an approaching vehicle from
the rear is detected, the 'Watch (out)
for traffic' warning message will
appear on the cluster, and an audible
warning will sound.
• Safe Exit Warning will warn the driver
when your vehicle speed is below
3 km/h (2 mph), and the speed of the
approaching vehicle from the rear is
above 5 km/h (3 mph).
WARNING
Take the following precautions when
using Safe Exit Warning
• For your safety, change the Settings
after parking the vehicle at a safe
location.
• If any other system's warning
message is displayed or audible
warning is generated, Safe Exit
Warning warning message may not
be displayed and audible warning
may not be generated.
• You may not hear the warning
sound of Safe Exit Warning if the
surrounding is noisy.
• Safe Exit Warning does not operate
in all situations or cannot prevent all
collisions.
OTM070101N OTM070101N