Hyundai KONA 2021 Owner's Manual page 410

Warning Volume
With the engine on, select 'Driver
Assistance → Warning Volume' from the
Settings menu to change the Warning
Volume to 'High', 'Medium' or 'Low' for
Blind-Spot Safety system.
If you change the Warning Volume,
the warning volume of other Driver
Assistance systems may change.
CAUTION
• The setting of the Warning Timing
and Warning Volume applies to all
functions of the Blind-Spot Safety
system.
• Even though 'Normal' is selected
for Warning Timing, if the vehicles
approaches at high speed, the initial
warning activation time may seem
late.
• Select 'Late' for Warning Timing
when traffic is light and when driving
speed is slow.
System operation
System warning
  Left-side Left-side
 
  Right-side Right-side
 
OTM070141N OTM070141N
Vehicle detection
• To warn the driver a vehicle is
detected, the warning light on the
outside rearview mirror and head-up
display (if equipped) will illuminate.
• The function will operate when your
vehicle speed is above 20 km/h (12
mph) and the speed of the vehicle in
the blind spot area is above 10 km/h
(7 mph).
Collision warning
• Collision warning will operate when
the turn signal is turned on in the
direction of the detected vehicle.
• To warn the driver of a collision, the
warning light on the outside rearview
mirror and head-up display (if
equipped) will blink. At the same time,
an audible warning will sound.
• When the turn signal is turned off or
you move away from the lane, the
collision warning will be canceled
and the system will return to vehicle
detection state.
07
OOS057024 OOS057024
7-37