Headlamp, Position Lamp, Turn Signal Lamp And Daytime Running Light Bulb Replacement - Hyundai KONA 2021 Owner's Manual

Hide thumbs Also See for KONA 2021:
Table of Contents

Advertisement

Headlamp, position lamp, turn
signal lamp and daytime running
light bulb replacement
Type A
(1) Turn signal lamp
(2) Headlamp (High/Low)
(3) Daytime running light (if equipped) /
Position lamp (LED)
(4) Daytime running light (if equipped) /
Position lamp (LED)
(5) Front fog lamp (if equipped)
WARNING
• Handle halogen bulbs with care.
Halogen bulbs contain pressurized
gas that will produce flying pieces
of glass that could cause injuries if
broken.
• Wear eye protection when changing
a bulb. Allow the bulb to cool down
before handling it.
• Always handle them carefully, and
avoid scratches and abrasions. If
the bulbs are lit, avoid contact with
liquids.
• Never touch the glass with bare
hands. Residual oil may cause the
bulb to overheat and burst when lit.
• A bulb should be operated only when
installed in a headlamp.
• If a bulb becomes damaged or
cracked, replace it immediately and
carefully dispose of it.
OOS090017K
OOS090017K
Headlamp
1. Open the hood.
2. Disconnect the negative battery
cable.
3. Remove the bulb cover (1) by turning
it counterclockwise.
4. Disconnect the bulb socket-
connector. (for low beam and high
beam)
5. Remove the bulb from the headlamp
assembly.
6. Install a new bulb.
OLMB073042L
OLMB073042L
7. Connect the bulb socket-connector.
(for low beam and high beam)
8. Install the bulb cover by turning it
clockwise.
09
OOS090054L
OOS090054L
9-71

Advertisement

Table of Contents
loading

Table of Contents