Fuses - Hyundai IONIQ 5 Owner's Manual

Fuses

■ Blade type
Normal
■ Cartridge type
Normal
■ Multi type
Normal
Table_text_OTM078035
A vehicle's electrical system is protected
from electrical overload damage by fuses.
This vehicle has 2 (or 3) fuse panels, one
located in the driver's side panel bolster,
the other in the vehicle compartment.
If any of your vehicle's lights, accessories,
or controls do not work, check the
appropriate circuit fuse. If a fuse has
blown, the element inside the fuse will be
melted or broken.
If the electrical system does not work,
first check the driver's side fuse panel.
Before replacing a blown fuse, turn the
vehicle and all switches off, and then
disconnect the negative battery cable.
Always replace a blown fuse with one of
the same rating.
If the replacement fuse blows, this
indicates an electrical problem. Avoid
using the system involved. Consult an
authorized HYUNDAI dealer.
NEVER replace a fuse with anything but
Blown
another fuse of the same rating.
• A higher capacity fuse could cause
damage and possibly cause a fire.
• Do not install a wire or aluminum foil
instead of the proper fuse - even as a
temporary repair. It may cause
extensive wiring damage and possibly a
fire.
Blown
NOTICE
Do not use a screwdriver or any other
metal object to remove fuses because it
may cause a short circuit and damage the
system.
Blown
WARNING
9
9-35