Spectrum Controls SLC 500 User Manual page 5

Preface
Who Should
Use This Manual
What This
Manual Covers
Related
Documentation
Read this preface to familiarize yourself with the rest of the manual. This preface
covers the following topics:
Who should use this manual
•
What This Manual Covers
•
Related documentation
•
Technical Support
•
Documentation
•
Conventions used in this manual
•
Use this guide if you design, install, program, or maintain a control system that
uses Allen-Bradley Small Logic Controllers.
You should have a basic understanding of SLC 500 products. You should also
understand electronic process control, and the ladder program instructions
required to generate the electronic signals that control your application. If you do
not, contact your local Allen-Bradley representative for the proper training before
using these products.
This guide covers the 1746sc-INI4i and 1746sc-INI4vi isolated analog input
modules. It contains the information you need to install, wire, use, and maintain
these modules. It also provides diagnostic and troubleshooting help should the
need arise.
The table below provides a listing of publications that contain important
information about Allen-Bradley PLC systems.
Refer to this Document
SLC 500 System Overview
Application Considerations for Solid
State Controls
Allen-Bradley Programmable Controller
Grounding and Wiring Guidelines
Installation & Operation Manual for
Modular Hardware Style Programmable
Controllers
Installation & Operation Manual for
Fixed Hardware Style Programmable
Controllers
Allen-Bradley Advanced Programming
Software (APS) User Manual
SLC 500™ Isolated Analog Input Modules
User's Manual Pub. 0300128-04 Rev. A
Allen-Bradley
Pub. No.
1747-2.30
SGI-1.1
1770-4.1
1747-6.2
1747-NI001
1747-6.4
v