Table of Contents
Advertisement
2.1
Installation Environment
Table 2.1 shows the environmental conditions for the location in which the TH series
Robot and TS1000 controller are to be installed.
Table 2.1 Environmental conditions for robot and controller
Item
Temperature
Humidity
Altitude
Vibration
Dust
Gas
Sunlight
Power noise
Magnetic field
•
Do not place the robot or controller near combustible. Doing so could lead
to fires if it ignites due to a fault, etc.
TRANSPORTATION AND INSTALLATION MANUAL
Section 2
Installation
In operation
:
0 to 40°C
In storage
:
–10 to 50°C
20 to 90 % (Non-condensing)
DO NOT install the robot where it may be subject to fluids
such as water.
1000 m or less
In operation
:
0.98m/s
In transport
:
9.8m/ s
No inductive dust should exist.
Consult with Toshiba Machine first if you wish to use the
robot and controller in a dusty environment.
No corrosive or combustible gas should exist.
The robot and controller should not be exposed to direct
sunlight.
A heavy noise source should not exist nearby.
A heavy magnetic field source should not exist nearby.
!
– 16 –
Specifications
2
or less
2
or less
DANGER
STE 73995
Advertisement
Table of Contents
