Charge Fee Reference - Panasonic KX-TD816AL User Manual

2.2

Charge Fee Reference

Allows you to view, print out and clear charges. Charges are displayed per extension, CO
line, account code, or the total of each can be referred to. There are eight corresponding
features as follows:
[Program]—[99]—[8]—[ID Code] — [1] Extension Charge Fee Reference
Conditions
• System Programming determines the extension that can view charges.
• An identification code (ID code), set by System Programming, is required to view charges.
• The first display format – Meter or Charge (AS$) – is selected by System Programming.
This can be switched manually at each extension.
• You may use the overlay while programming. In this case, the HOLD button becomes the
END button and the REDIAL button becomes the PREV button.
Programming References
• System Programming — Installation Manual
[117] Charge Display Selection
[118] Charge Verification Assignment
[119] Charge Verification ID Code Set
Programming
— [2] CO Line Charge Fee Reference
— [3] Total Extension Charge Fee Reference
— [4] Account Code Charge Fee Reference
— [5] New Rate Set
— [6] All Clear
— [7] Print the Charge Fee
— [8] Account Code Set
Station Programming
2-7