Panasonic KX-TD816AL User Manual page 112

C
To talk to the new party by holding the current call
1
HOLD
2
CO
or
Conditions
• Call Waiting tone is generated at the extension in the following conditions:
1) When a CO call comes in.
2) When another extension executes the "Busy Station Signaling (BSS)" feature.
• Setting "Data Line Security" temporarily cancels this feature.
• You can change the desired Call Waiting tone (Tone 1 or Tone 2).
Programming References
• Station Programming (Section 2)
Call Waiting Tone Type Assignment
Feature References
Busy Station Signaling (BSS)
Data Line Security
3-46
DPT Features
While hearing Call Waiting tone and the CO or INTERCOM indicator is
flashing rapidly;
1. Press the HOLD button.
• The current call is placed on hold.
INTERCOM
2. Press the flashing CO or INTERCOM button.
• You can talk to the new caller.
— If both the current call and new call are extension calls, you can
skip step 2 and talk to the new caller.
3.2 DPT Features