Panasonic KX-TD816AL User Manual page 114

C
Display Operation (— for KX-T7230)
0111111111
JOHN WHITE
S1 S2
CO 02 12: 00'30
INFO LOG
S1 S2
CO 02 12: 00'30
INFO LOG
S1 S2
JOHN WHITE
INFO LOG
S1 S2
Conditions
• The SHIFT indicator light may turn on when receiving a call. Pressing this button provides
you with more information about the caller.
• If a call is carried from the ISDN line, only the telephone number is informed to the system.
The system provides the caller's name by comparing the number with the Speed Dialling
Numbers and Names. If the Speed Dialling Number is not given a name, the display of the
name is unavailable.
Programming References
• System Programming — Installation Manual
[001] System Speed Dialing Number Set
[002] System Speed Dialing Name Set
Feature References
CO Incoming Call Information Log
CO Incoming Call Information Log Lock
CO Incoming Call Information Log Mode
*
The ISDN line with the CLIP feature provides you with a caller's information, such as his/her name and
telephone number, on the CO line assigned to receive ISDN service call. Refer to the Installation Manual.
3-48
DPT Features
When you receive a CO incoming call, the display shows the caller's
telephone number and the name.
• If you are assigned as an operator, the display shows the CO line
S3
number and CO line name, if assigned.
1. Lift the handset or press the SP-PHONE button.
• The display changes as follows:
• If you want the normal display, press the SHIFT button. The
S3
bottom line of the display shows:
2. Press the INFO (S1) button if you want to know who is
calling.
S3
• The upper line of the display changes as follows:
3. Press the LOG (S2) button if you want to record the information.
S3
3.2
CONT EFA ACCNT
0111111111
JOHN WHITE
DPT Features
(caller's telephone number)
(caller's name)