2.2
Direct Station Selection (DSS) Button
Allows you to assign a Flexible (CO or DSS) button as a DSS button.
— Be sure that you are in the Station Programming mode : Press [PROGRAM] [9] [9].
1
2
1
3
extension number
4
AUTO DIAL
STORE
— To exit from Station Programming mode : Press [PROGRAM] or lift the handset.
Conditions
• DSS buttons are provided on the DSS Console with a default setting. You can change the
setting from a paired telephone.
• You cannot enter the non-existent extension numbers.
2-18
Station Programming
Programming
1. Press the desired Flexible (CO, DSS) button which you wish to
assign as a DSS button.
2. Dial 1.
• The display shows:
EXT-
CLR
3. Dial the extension number.
• The display shows:
EXT-xxxx
CLR
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button when using the overlay.)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
(Assignment)
(—xxxx: extension number)