2.2
CO Line Charge Fee Reference
Provides you with the display of each CO line charge (telephone rate). You can refer the
displayed meter and charge.
— Be sure that you are in Station Programming mode : Press [PROGRAM] [9] [9].
1
8
2
ID code
3
2
4
CO line number
5
SEL
S1
S2
6
HOLD
— To exit from Station Programming mode : Press [PROGRAM] or lift the handset.
Programming
1. Dial 8.
2. Enter the ID code (4 digits).
• To erase an incorrect entry, press the CLR (S2) button.
3. Dial 2.
4. Dial the CO line number (01 through 08) or (01 through 24), or
press the NEXT (S3) button until the CO line number is designated.
– 01 through 08 : if you are connected to the KX-TD816
– 01 through 24 : if you are connected to the KX-TD1232
• The display shows the meter.
< Example> If you assign the CO line number 08;
5. Press the SEL (S1) button.
• The display shows the meter.
< Example>
S3
• Pressing each button corresponds to the following operations:
— NEXT (S3) button : To advance to the next CO line number.
— REDIAL (PREV) button : To return to step 4.
6. Press the HOLD (END) button.
• The display shows the initial programming mode.
CO08:00005
SEL
NEXT
CO08:$00001.5
SEL
NEXT
Station Programming
2-9