Panasonic KX-TD816AL User Manual page 116

C
01:0111111111
INFO CLR
S1 S2
05:0011223344
INFO CLR
S1 S2
05:0011223344
CALL
S1 S2
Conditions
• If you do not answer a call, your extension automatically records the caller's information.
• To clear the displayed information, press the CLR (S2) button.
• You can modify the displayed telephone number before dialling. Dialled number appears from
the first digit. Pressing " " erases the numbers from the first digit.
• You can control the CO Incoming Call Information Log Mode when the information area is full.
• You can lock the display so that CO incoming call information is not shown on the display.
Programming References
• System Programming — Installation Manual
[001] System Speed Dialing Number Set
[002] System Speed Dialing Name Set
Feature References
CO Incoming Call Information Log Lock
CO Incoming Call Information Log Mode
*
The ISDN line with the CLIP feature provides you with a caller's information, such as his/her name and telephone
number, on the CO line assigned to receive ISDN service call. Refer to the Installation Manual.
3-50
DPT Features
2. Confirm the information by pressing the NEXT (S3) or PREV (S3)
NEXT
button.
• Pressing the SHIFT button provides you with the PREV (S3) button
S3
on the display.
• Pressing the INFO (S1) button provides you with the further
information for one party. The upper line of the display changes as
follows:
• To exit from this mode, press the SHIFT button and then EXIT (S1)
button.
NEXT
3. Lift the handset or press the SP-PHONE button if you want to call
S3
back the party on the display.
4. Press the CALL (S1) button.
• You hear dial tone (Line access, Automatic).
• You may press the CO button first to select the specified CO line.
S3
3.2
01:BOB HANKS
01:30 09:00PM 2
CO12:AB COMPANY
DPT Features
(sequence number and a name)
(sequence number, date,
time, and number of times called)
(CO line number and CO line name)