Account Code Entry - Panasonic KX-TD612E Features Manual

Account Code Entry

Description
An account code is used to identify incoming and outgoing outside for accounting and billing
purposes. The account code is appended to the Station Message Detail Recording (SMDR) call
record. For incoming outside call, account codes are optional. For outgoing outside call there
are 3 modes available to enter an account code: Verified — All Calls mode; Verified — Toll
Restriction Override mode; and Option mode. One mode is selected for each extension on a
Class of Service basis.
In Verified — All Calls mode, the user must always enter a pre-assigned account code when
making any of the following calls unless it has previously been stored in memory:
• Call Forwarding — to CO Line
• Line Access, Automatic
• Line Access, CO Line Group
• Line Access, Direct
• Line Access, Individual
• Notebook Function
• One-Touch Dialling
• Pickup Dialling
• Redial, Saved Number
• Station Speed Dialling
• System Speed Dialling
In Verified — Toll Restriction Override mode, the user can enter a pre-assigned account code
only when the user needs to override toll restriction.
In Option mode, the user can enter any account code when needed.
Conditions
• An account code can be stored into Memory Dialling (System/Station Speed Dialling;
Notebook Function; One-Touch Dialling; Pickup Dialling; Call Forwarding — to CO Line).
• The Account button may be used in place of the feature number. A flexible button on the
digital proprietary telephone set can be programmed as the Account button.
• If the account code stored in location 01 of the programming table is used, the dialled
number is not printed out to SMDR (Private Call).
• It is possible to select whether the account code is printed out or not by the SMDR. If it is
not printed out, it is shown in dots.
Features Guide
1.1 General Features
11