Panasonic KX-TD816AL User Manual page 285

6
Full One-Touch Dialing Assignment
• Enter into programming mode.
• Dial 3.
• Dial 1 or 2.
- 1: Off mode
- 2: On mode
• Press STORE button.
• Exit from programming mode.
Handset / Headset Selection
• Enter into programming mode.
• Dial 9.
• Dial 1 or 2.
- 1: Handset mode
- 2: Headset mode
• Press STORE button.
• Exit from programming mode.
Intercom Altering Assignment
• Enter into programming mode.
• Dial 4.
• Dial 1 or 2.
- 1 : Ring-Calling (Tone Call) mode
- 2 : Voice-Calling mode
• Press STORE button.
• Exit from programming mode.
Preferred Line Assignment
— Incoming
• Enter into programming mode.
• Dial 2.
• Dial 1, 2, or 3 + CO line number.
- 1 : No Line Preference
- 2 : Ringing Line Preference
- 3 + CO line number
: Prime Line (CO Line) Preference
• Press STORE button.
• Exit from programming mode.
Quick Reference
Preferred Line Assignment
— Outgoing
Ringing Tone Selection for CO
Buttons
Self-Extension Number Confirmation
Station Programming Data Default
Set
• Enter into programming mode.
• Dial 1.
• Dial 1, 2, 3 + CO line number, or press IN-
TERCOM button.
- 1 : No Line Preference
- 2 : Idle Line Preference
- 3 + CO line number
: Prime Line (CO Line) Preference
- INTERCOM
: Prime Line (INTERCOM) Preference
• Press STORE button.
• Exit from programming mode.
• Enter into programming mode.
• Press the desired CO button.
• Press the same CO button again.
• Dial the tone type number (1 through 8).
• Press STORE button.
• Exit from programming mode.
• Enter into programming mode.
• Dial 6.
• Press HOLD (END) button.
• Exit from programming mode.
• Enter into programming mode.
• Dial #.
• Press STORE button.
• Exit from programming mode.
6-5
Quick Reference