Panasonic KX-TD816AL User Manual page 109

3.2 DPT Features
Call Transfer using a DSS button
Allows you to perform a Screened or Unscreened Call Transfer by using a DSS button.
There are two operations, depending on whether or not One-Touch Transfer
*
One-Touch Transfer allows you to hold a CO call and transfer it to an extension with one key depression. This
feature provides automatic hold and transfer, without pressing the TRANSFER button. System Programming is
required to use this function.
"One-Touch Transfer" mode enabled:
1
"One-Touch Transfer" mode disabled:
1
TRANSFER
2
Conditions
• If you want to return to the held call, press the TRANSFER button or corresponding CO or
INTERCOM button before the destination extension answers.
• If the destination extension does not answer the call within twelve rings (default), the call
returns to you as a "Transfer Recall" call.
The display shows:
<Example>
• If there is no answer for thirty minutes after the "Transfer Recall" starts, the line is
disconnected.
• A flexible CO button can be assigned as a DSS button.
• "One-Touch Transfer" is assigned through System Programming.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — DSS Button
(System Programming — [005] (Installation Manual) can be used for this assignment.)
While having a conversation;
1. Press the desired flexible button which is assigned as the DSS
button.
• The other party is placed on hold and the destination extension
is called immediately.
While having a conversation;
1. Press the TRANSFER button.
2. Press the desired flexible button which is assigned as the DSS
button.
RCL: Ext 103
C
is set.
*
3-43
DPT Features