Table of Contents
Advertisement
4.5.1 HDD Security Configuration
Set User Password
Set HDD user password.
*** Advisable to power cycle system after setting hard disk passwords ***
Discard or save changes option in setup does not have any impact on HDD when password is
set or removed. If the 'Set HDD User Password' option is gray, do power cycle to enable the
option again.
4.5.2 Security Boot
Attempt Secure Boot
Secure Boot activated when Platform Key (PK) is enrolled, System mode is User/Deployed, and
CSM function is disabled.
Secure Boot Mode
Secure Boot mode selector Standard/Custom.
In custom mode Secure Boot Variables can be configured without authentication.
Figure 4-5-1: HDD Security Settings
Figure 4-5-2: Security Boot Settings
56
eIVP-CFS-IV-V0004
Advertisement
Table of Contents
