Table of Contents
Advertisement
eIVP-CFS-IV-V0004
Wake on LAN
Enable or disable integrated LAN to wake the system. (The wake On LAN cannot be disabled if
ME is on at Sx state.)
Serial IRQ Mode
Configure serial IRQ mode.
State After G3
Specify what state to go to when power is re-applied after a power failure (G3 state).
S0 State: Always turn-on the system when power source plugged-in.
S5 State: Always turn-off the system when power source plugged-in.
4.4.2.1 PCI Express Configuration of PCH-IO
Figure 4-4-2-1: PCH-IO Settings
DMI Link ASPM Control
Enable/Disable the control of Active State Power Management on SA side of the DMI Link.
Native PCIE Enable
PCIE Express Native Support Enable/Disable.
PCI Express device settings
Bios options for PCI Express device setting.
53
Advertisement
Table of Contents
