Ethernet Port - EverFocus eIVP-CFS-IV-V0004 User Manual

9. USB3.1 Ports
10.

Ethernet Port

Audio
11.
Connector
12. SSD/HDD Tray
1.4.1 Power Button
The Power Button is a non-latched switch with dual color LED indication. It indicates power status:
S0, S3 and S5. More details of LED indications are listed as follows:
LED Color
Solid Blue
Solid Orange
To power on the system, press the power button and then the blue LED is lightened. To power off
the system, you can either command shutdown by OS operation, or just simply press the power
button.
1.4.2 CFast Card
If a system error occurs, you can just press the power button for 4 seconds to shut down the machine
directly. Please do note that a 4-second interval between each 2 power-on/power-off operation is
necessary in normal working status. (For example, once you turn off the system, you have to wait for
4 seconds to initiate another power-on operation).
There is a CFast socket on the front panel supporting Type-I/II Compact Flash card. It is implemented
by a SATA III Port from C246 PCH. Be sure to disconnect the power source and unscrew the CFast
socket cover before installing a CFast card. The eIVP-CFS-IV-V0004 does not support the CFast hot
There are 4 USB 3.1 connections available supporting up to 5Gb per
second data rate in the front side. It is also compliant with the
requirements of Super Speed (SS), high speed (HS), full speed (FS) and
low speed (LS).
There are 2 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side. When both LAN 1 and LAN 2 work in
normal status, iAMT 12.0 function is enabled. Both of LAN 1 and LAN 2
support Wake on LAN and Pre-boot functions. For more details, please
refer to 1.4.5 Ethernet Port.
There are 2 audio connectors, Mic-in and Line-out. Onboard Realtek
ALC892 audio codec supports 5.1 channel HD audio and fully complies
with Intel® High Definition Audio (Azalia) specifications.
To utilize the audio function in Windows platform, you need to install
corresponding drivers for both Intel Sunrise Point chipset and Realtek
ALC892 codec.
There are 2 front-access 2.5" SSD/HDD trays in the front side. Just pull
the trigger to open the SSD/HDD tray. Make sure the system is
powered-off. Unlock the SSD Tray using the supplied SSD Lock Key.
Power Status
S0
S3, S5
System Status
System working
Suspend to RAM, System off with
standby power
4
eIVP-CFS-IV-V0004